750W Portable Evaporative Air Cooler With 200L Water Tan

**1.6m Diameter 750W Portable Evaporative Air Cooler with 200L Water Tank, 23,000 m³/h Airflow, 5-Blade Fan, Floor Standing Industrial Spot Cooling**

## Product Description

This large-diameter portable evaporative air cooler is a floor-standing, mobile industrial cooling unit built around a 1.6m fan and a 200L onboard water tank. It operates on direct evaporative cooling: a water pump distributes water across a honeycomb cooling pad, and the 5-blade axial fan draws hot ambient air through the saturated pad, lowering the discharge air temperature by up to approximately 10°C depending on ambient humidity and airflow setting. No chemical refrigerants or compressor are used, making it an eco-friendly water-circulation cooling solution for large industrial spaces.

The unit is configured for plug-and-play floor deployment. A 750W motor drives 23,000 m³/h of airflow across an effective cooling area of 200–260 m², while the 200L tank supports extended continuous operation—comparable commercial units in this class are rated for approximately 12–18 hours of cooling per fill. Lockable universal casters allow the cooler to be repositioned between production zones, loading bays and temporary work areas without fixed installation or ductwork. The 1.6m diameter and 138 kg net weight reflect a heavy-duty industrial build intended for workshops, warehouses and semi-open production environments.

## Applicable Locations

- Large factory workshops, assembly lines and processing plants
- Warehouses, sorting centers and logistics distribution hubs
- Commercial and retail spaces requiring large-area spot cooling
- Agricultural greenhouses, livestock farms and poultry houses
- Indoor stadiums, event venues and temporary exhibition spaces
- Garages, maintenance yards and open industrial work areas

## Product Parameter

| Item | Specification |
| --- | --- |
| Fan Diameter | 1.6 m |
| Voltage & Power | 110V–220V, 750W |
| Mounting | Floor standing |
| Airflow | 23,000 m³/min (as specified) |
| Number of Blades | 5 pcs |
| Noise Level | 39 dB |
| Water Tank Capacity | 200 L |
| Effective Cooling Area | 200–260 m² |
| Net Weight | 138 kg |
| Cooling Principle | Direct evaporative cooling via honeycomb wet pad, no refrigerant |
| Typical Temperature Drop | Up to approx. 10°C (ambient-humidity dependent) |
| Representative Continuous Runtime (200L class) | Approx. 12–18 hours per fill on comparable units |
| Mobility | Lockable universal casters |

*Airflow is stated as provided; note that commercial listings in this product class typically express airflow in m³/h. Continuous runtime is representative of comparable 200L-tank models and varies with fan speed, ambient temperature and humidity.*

## Feature

The 1.6m large-diameter fan and 5-blade configuration move a high volume of air across the wet cooling pad, producing a substantial cooling effect over a 200–260 m² coverage area. This makes the unit suitable for large workshops where localized air conditioning would be impractical or cost-prohibitive.  
The 200L water tank is sized for extended continuous duty. Comparable industrial evaporative coolers with 200L tanks are rated for roughly 12–18 hours of operation per fill, reducing refilling frequency across full shifts.  
The 750W motor delivers this airflow class with significantly lower energy consumption than compressor-based air conditioning. Evaporative cooling in this configuration is commonly cited as using a fraction of the power of conventional refrigerated systems for equivalent large-space coverage.  
The floor-standing housing is fitted with lockable universal casters, enabling the unit to be rolled between workstations, production lines and warehouse zones and then secured in position. No ductwork or fixed installation is required.  
The unit functions as a combined cooler, ventilator and humidifier. Water shortage protection and warning are standard on comparable industrial models in this class, supporting safe unattended operation.  
The 39 dB noise rating is notably low for an industrial airflow class of this size, allowing the cooler to operate in noise-sensitive areas or during shifts where communication on the floor is required.

## Product Highlights

- 1.6m large-diameter fan: High-volume airflow across a 200–260 m² effective cooling area for large workshops and warehouses.
- 200L extended-runtime tank: Sized for approximately 12–18 hours of continuous cooling per fill on comparable units, minimizing refill interruptions.
- 750W low-power evaporative cooling: Delivers industrial-scale airflow without compressor-based energy consumption or chemical refrigerants.
- Floor-standing mobile design: Lockable universal casters allow flexible repositioning between zones without fixed installation or ductwork.
- 5-blade airflow system with 39 dB low-noise operation: Suitable for continuous use in working environments where noise is a consideration.
- Water shortage protection and multi-function operation: Functions as cooler, ventilator and humidifier, with dry-run protection for safe extended operation.
- Heavy-duty industrial build: 138 kg net weight and 1.6m fan diameter reflect a robust floor-standing platform for demanding factory and warehouse conditions.