Kejun Ventilation Equipment (Dongguan) Co., Ltd. Cases

The benefits of water-cooled air conditioning:Water cooled air conditioning is a machine that can lower indoor temperature by using special materials and processes to cool the air. This type of air conditioner has high efficiency and can achieve much lower energy consumption levels than typical central air conditioners. In addition, due to the evaporation of water vapor through the pipeline system, there will be no problem of condensed water droplets falling onto the floor. Overall, water-cooled air conditioners are a very effective energy-saving device because they remove heat directly from the air instead of consuming a lot of electricity like regular air conditioners, thus greatly reducing energy costs.Combination method of water-cooled air conditioning:There are many factors to consider when choosing a combination of water-cooled air conditioners, and the first step is to determine what kind of effect you want. If you just want a better cooling effect, then simply put two independent units together; If it is to save space and installation costs, then it should be placed separately or a small room should be added specifically to accommodate one unit; If you want to be more energy-efficient and environmentally friendly, you can directly use a refrigerant injection water-cooled air conditioning system. In short, when purchasing a water-cooled air conditioner, it is important to choose according to your own needs in order to obtain the best solution that suits you best.

Hardware mold factories can produce metal stamping parts, undertake incoming stamping processing, and provide stamping parts for the automotive, home appliance, and office automation industries. Automotive stamping parts such as car bumpers, seats, instrument panels, and chassis, as well as refrigerator, oven metal stamping parts, printer stamping parts, door locks, lighting, electronic and electrical small hardware parts, all require the hard work of hardware mold factory workers to produce and process. However, during the hot summer season, these workers face a great challenge. The high temperature, stuffiness, and odor in the workshop make it difficult for them to concentrate and work properly. It is imperative for enterprises to customize a ventilation and cooling plan for the hardware mold factory to improve the workshop environment in order to solve this problem.Analysis of Environmental Issues in Stamping Workshop of Hardware Mold Factory and Improvement Suggestions:In order to meet the production requirements and processes of different products, hardware mold factories generally have multiple processing equipment such as computer gongs, lathes, grinders, milling machines, drilling machines, wire cutting and welding in the production and processing workshops. These equipment generate a large amount of heat and dust during use, especially in summer when the ambient temperature rises. The temperature inside the workshop is even higher than outside, and the dust odor generated during the production process will exacerbate the deterioration of the workshop environment. Without effective ventilation and cooling equipment to improve the workshop environment, high ambient temperature will affect workers' work efficiency and cannot achieve daily workload.The workshop area and volume of the hardware mold factory are relatively large, and the workers are scattered. Most of the work positions in the workshop are for operating machines. The high temperature and stuffiness do not affect the normal use of machines, mainly because the workers cannot bear it. Operating machine tools is a type of equipment with a high degree of danger. If the working environment is poor, it is easy for employees to be irritable and careless at work, which not only affects their work efficiency but also increases the safety accident rate. In response to the environmental characteristics of the hardware mold factory workshop, it is recommended to install environmentally friendly air conditioning for designated positions to cool down, so that each worker in the machine operation position has a separate air outlet to enjoy clean, cool, and odorless natural cold air, making it very comfortable for employees to blow and increasing work enthusiasm, Moreover, the cooling plan for designated positions is relatively the most energy-efficient and cost-effective solution, and almost all hardware mold factories have adopted this plan to carry out environmental air conditioning cooling projects in hardware mold stamping workshops.